Heat Pipe Steam Generator for Waste Heat

Description

Heat Pipe is both side sealed pipe ,which have easy evaporation medium inside ,and vacuum condition. pipe inside was treated to avoid any reaction with pipe. when heat the  pipe evaporation section ,inside medium will collect the heat energy and become gaseous to go upto condensing section ,then release the heat energy and become soild medium again and fall down  to pipe bottom again.
Heat Pipe have different fins based on the hot smoke element.and these fins can enhance the heat transferring efficiency more than 30%-80%.

Jet-flow pipe heat transferring efficiency is very high, normal heat pipe heat transferring rate :22W(M2.C),but Jet-flow pipe can increase to 52W(M2.C).
Jet-flow pipe  through air spray to low down the pipe temperature , increase the pipe working life.and easy to clean dust,and hardly to block dust on it. and spray air can be heated to more than 600C, so it can sue for high smoke heat energy saving  stage.

Heat Pipe waste heat boiler mostly for nitrogen fertilizer industry,use its hot gas waste heat to collect heat and make steam.
Heat Pipe waste heat boiler constitute by inner shell  ,heat pipe,outer shell .heat pipe was welded on inner shell, water pass from the inner shell, hot gas pass between heat pipes ,hot gas will release the heat and collected by the heat pipe and water in inner shell will be heating ,so achieved heat exchanging.

Heat Pipe waste heat boiler Data: